TrikeBuggy Home Page

Stainless Steel Buggy Parts:

Front Forks

Genuine TrikeBuggy Replacement Parts

Why |  Para |  Delta |  Transformer |  Gallery |  Video  |  Pilots |  Innovations |  Training |  Products |  Used |  Prices |  Sites |  Weather


Stainless Steel Buggy Parts - Front Forks

Buggy Accessories:
   Standard Wheels
   Wide Wheels
   Wheeleez Wheels
   Front Forks
   Standard Back Axle
   Wide Back Axle
   "Slider" Back Axle
   Extra-Long Downtube

PPG Products:
   Power Gliders
   Power Kites
   Paramotors
   Reserves
   Harnesses
   Propellers
   Helmets & Radios
   Accessories
   Instruments
   Flight Suits
   T-Shirts, etc.
   Bags & Pads
   DVD's
   Books
   Land Sailor
   Other PPG Trikes

TrikeBuggy Specific:
   Innovations
   Parts
   Stainless Buggy
   TrikeBuggies

$96

Stainless Steel Buggy
Front Fork for Standard Wheels, 4" or 6"

The Stainless Steel Buggy Front Fork is the same one that is supplied as standard equipment with the TrikeBuggy Stainless Steel Buggy and TrikeBuggy Microlights. It is the original fork made for either 4" (narrow) or 6" (wide) TrikeBuggy Wheels. Axle diameter is 1/2". All Front Forks include the Axle Bolt.

$120

Stainless Steel Buggy
Front Fork for Wheeleez 30cm Wheels, 1/2" axle

This Stainless Steel Buggy Front Fork is specially made to accomodate the wider wheel width of the Wheeleez wheels. This Front Fork fits on all TrikeBuggy Bullet and Classic models used with Paragliders. These wheels are not suitable for the TrikeBuggy Delta. Axle diameter is 1/2". All Front Forks include the Axle Bolt.

$140

Stainless Steel Buggy
Front Fork for Wheeleez 42cm Wheels, 1/2" or 1" axle

This Stainless Steel Buggy Front Fork is specially made to accomodate the wider wheel width of the Wheeleez wheels. This Front Fork fits on all TrikeBuggy Bullet and Classic models used with Paragliders. These wheels are not suitable for the TrikeBuggy Delta. Axle diameter is 1/2 or 1 inch, please specify when ordering. All Front Forks include the Axle Bolt.
 

TrikeBuggy Home Page
www.TrikeBuggy.com
805.966.5900
info@TrikeBuggy.com
TrikeBuggy, Inc.

Why |  Para |  Delta |  Transformer |  Gallery |  Video  |  Pilots |  Innovations |  Training |  Products |  Prices |  Sites

DISCLAIMER: Please read and be sure you thoroughly understand this disclaimer before flying a TrikeBuggy. Trike flying is an extremely demanding sport requiring exceptional levels of attention, judgment, maturity and self discipline. It is unlikely that you will be able to participate in it safely unless you make a conscious and continual commitment to your own safety. PPG and Hang Glider Trike flying is a dangerous sport and may result in injury and death even when practiced by a competent pilot using proper equipment. TrikeBuggies are not covered by product liability insurance, nor have they been designed manufactured or tested to any federal or state government airworthiness standards or regulations. Do not fly them unless you are willing to assume personally all risks in the sport of Trike flying, and all responsibility for any property damage, injury, or death which may result from your use of this TrikeBuggy. Safe operation of the TrikeBuggy requires a pilot proficiency equivalent to that of a BFI (Basic Flight Instructor), as well as an equivalent level of knowledge and understanding of those wind and weather conditions which may compromise the pilot's safe control of the TrikeBuggy. In particular, be advised that gusty winds or turbulent conditions may interfere with even an expert pilot's ability to safely control the TrikeBuggy, and may cause it to crash. Never take anything for granted in Trike Flying. If you are in doubt about anything, stop and figure it out or call TrikeBuggy. Also please read our Warning and Caution!

All the information and images published in this website are property of TrikeBuggy.com unless stated otherwise.
Reproduction of any part of these contents (info, graphics & pictures) by other website or media is strictly forbidden,
unless specially authorized by TrikeBuggy.com
© TrikeBuggy 2006 – 2011
Please respect the rights and intellectual property of this Web site.